- RFID teknoloji (kod) ve hall teknoloji (uzaktan kontrol) tabanlı
- RFID tasarım, oldukça aldatılmaya karşı yüksek korumalı iki çalışma modeli içerir:
- M-tipleri (Master kodlu): Geleneksel switch’ler gibi herhangi bir aktüatörle her sensör çalışır
- U-tipleri (Benzersiz kodlu): Her sensör ve aktüatör benzersiz bir kod kullanır. Daha aldatılmaya karşı yüksek koruma gerektiren uygulamalar için bir çözümdür
- En fazla 20 switch seri olarak bağlanır
- LED kolay tanı koymayı destekler
- Mekanik toleransların dengelenmesi
- Kontaksız – aşınmasız – partikülsüz
- Tüm OMRON emniyet kontrolörleriyle çalışır
- IP69K sebebiyle CIP/SIP prosesleri ve yüksek basınçla temizleme için uygundur (kablolu tipler)
- EN ISO 13849-1’e göre PLe’ye kadar olan emniyet kategorileriyle uyumludur
Özellikler ve sipariş bilgisi
Ordering information
Master coded: Any actuator will operate with any sensor (Power down – power up re-teach needed if exchange of actuator)
Unique coded: Only one actuator fits to the code of the sensor
Elongated sensors
| Type | Cable connection | Contact configuration | Order code | |
| Master coded | Unique coded | |||
| 5 m pre-wired | 2NC/1NO | F3S-TGR-NLPM-21-05 | F3S-TGR-NLPU-21-05 | |
| 10 m pre-wired | F3S-TGR-NLPM-21-10 | F3S-TGR-NLPU-21-10 | ||
| M12, 8-pin | F3S-TGR-NLPM-21-M1J8 | F3S-TGR-NLPU-21-M1J8 | ||
Small sensors
| Type | Cable connection | Contact configuration | Order code | |
| Master coded | Unique coded | |||
| 5 m pre-wired | 2NC/1NO | F3S-TGR-NSPM-21-05 | F3S-TGR-NSPU-21-05 | |
| 10 m pre-wired | F3S-TGR-NSPM-21-10 | F3S-TGR-NSPU-21-10 | ||
| M12, 8-pin | F3S-TGR-NSPM-21-M1J8 | F3S-TGR-NSPU-21-M1J8 | ||
Specifications
Mechanical data
| Item | ||
| Serial switching | up to 20 pcs. | |
| Indicator LED | LED green – Indication of safety circuit closed | |
| Operating distance | OFF å ON (Sao) | 10 mm Close |
| ON å OFF (Sar) | 20 mm Open | |
| Actuator approach speed | Min. | 4 mm/s |
| Max. | 1,000 mm/s | |
| Operating temperature | -25 to 80°C | |
| Enclosure protection | Flying lead | IP69K |
| M12 connector | IP67 | |
| Material cable | Flying lead | PVC, Ø 6 mm o.d. |
| M12 connector | 250 mm, PVC, Ø 6 mm o.d. | |
| Material | UL approved Polyester | |
Electrical data
| Item | F3S-TGR-N_M | F3S-TGR-N_U | ||
| Code | Master coded: Every switch same code (Power down – Power up re-teach needed, if actuator interchanged) | Unique coded: 32 x 16 6 different codes | ||
| Technology | RFID (code) and Hall (distance check) | |||
| Power supply | 24 VDC±15% | |||
| Power consumption | Max. | 0.2 A | ||
| Switching current | Min. | 1 mA, 10 VDC | ||
| Rated loads | NC contacts | Max. | 0.2 A, 24 VDC | |
| NO contact | Max. | 0.2 A, 24 VDC | ||
| Output type | Electronic output (potential-free optocoupler output) | |||
Approved standards
| EN standards certified by TÜV Rheinland |
| EN 62061 |
| EN ISO 14119 |
| EN ISO13849-1 |
| EN 60204-1 |
| EN standards certified by TÜV Rheinland |
| EN/IEC 60947-5-3 |
| UL 508, CSA C22.2 |
| BS 5304 |
| EN 1088-1 conformance |
Accessories
| Order code | ||
| Cables 8-pin | 2 m | Y92E-M12PURSH8S2M-L |
| 5 m | Y92E-M12PURSH8S5M-L | |
| 10 m | Y92E-M12PURSH8S10M-L | |
| 25 m | Y92E-M12PURSH8S25M-L | |
| T-Connector connection cable | T-Connector for M12 connector | F39-TGR-NT |
| 0.6 m, M12-8pin | Y92E-M12FSM12MSPURSH806M-L | |
| 2 m, M12-8pin | Y92E-M12FSM12MSPURSH82M-L | |
| 5 m, M12-8pin | Y92E-M12FSM12MSPURSH85M-L | |
| 10 m, M12-8pin | Y92E-M12FSM12MSPURSH810M-L | |
| Actuators (only for master coded types) | for F3S-TGR-NLPM | F39-TGR-NLPM-A |
| for F3S-TGR-NSPM | F39-TGR-NSPM-A | |
| Mounting screws | Set of Torx safety screws (M4, 4 × 30 mm, 4 × 20 mm, 4 × 10 mm; incl. washers and Torx bit) |
F39-TGR-N-SCREWS |
Wiring examples (Single head connection)
| G9SA
Single sensor application with G9SA-301 |
